Back        
  GENESIS SERIES BRUSHLESS DC DRIVES
     
 

The Genesis Series Brushless DC Drive Family is constructed on a digital platform employing an analog user interface. This interface includes potentiometer adjustable gain, stability, current limit, acceleration, deceleration, jog speed, max speed, and min speed. Run speed is controlled using either an external potentiometer or a digital pulse train input. With precise speed control and high torque at low speeds, the Genesis Series Drive Family provides servo-like response in a highly efficient and affordable package.
Simple Set-Up

The Genesis Series Brushless DC Drive Family was designed for easy configuration to your application. Set-up is completed in a matter of minutes by adjusting a few potentiometers to tailor the drive performance. The interface is clearly labeled and easily accessed on the speed controller board.

Precision Control
The Genesis Series Drive employs electromechanical Hall Sensor Feedback for motor commutation. Using an analog or digital pulse train speed input, the Hall Sensor Feedback circuitry provides for 0% Speed Regulation with a Constant
Torque Speed Range of 100:1 or better.

Low Power Consumption
The Genesis Series Drive has a near unity power factor at all motor speeds
and loads. The bottom transistors of the six-transistor power stage are controlled with pulse width modulation. Utilizing this design, the Genesis Series Drive draws only enough input current to provide torque to the motor.

Easy Maintenance
The same Speed Controller Board and Current Controller Board are used in the Genesis Series 1000, 2000, 3000, 3500, and 4000 drives. These boards are readily accessible, easily connected, and simple to configure. This Family approach to the Genesis Series Drives means smaller spare parts stock and added familiarity with the board-level operations of the drive family.

Features and Benefits

 
FEATURES
BENEFITS
Two or four quadrant operation Excellent control for both regenerative and non-regenerative applications
Input AC line fusing Fast acting fusing provides very high interrupting capacity for ground or short circuits within or after the control input.
DC link choke Line transient protection limits the rate of change in the input current
Separately adjustable min/max speed control, accel/decel time Precise configuration to your application
Adjustable gain, stability, current limit,and jog speed Precise configuration to your application
Bi-directional jog function Jog function operates in both forward and reverse in accordance with the forward/reverse input
Analog speed input 0 to +10 VDC Provides internal supply for analog speed pot operation or accepts 0 to +10 VDC external reference
Electronic gearing Provides uni-directional digital follower mode
Motor speed frequency output Open collector frequency output for metering or electronic gearing in a lead/follower system
Analog load output (optional on some models) Analog signal for metering represents 150% of output current or torque
Run relay output(optional on Model 500) External run contact for customer use:125 VAC @ 1A or 30 VDC @ 2A
Fault and zero speed open collector Outputs Digital outputs to indicate fault or zero speed conditions
0% speed regulation Built in speed feedback/phase lockloop control provides precise speed control
Constant Torque Speed Range(CTSR), 100:1 Precise speed and current regulation through the entire motor speed-torque range.
Standard two year warranty Assured quality and reliability